![LaserStar Technologoes Logo-01.png]](https://26739.fs1.hubspotusercontent-na1.net/hub/26739/hubfs/LaserStar%20Technologoes%20Logo-01.png?height=40&name=LaserStar%20Technologoes%20Logo-01.png){kind=small}
I am missing characters when rotary marking the inside of a ring or sample
If you've been experiencing an issue with your rotary marking quality where you are missing characters when marking the inside of a ring or other sample type.
In most cases this can be easily fixed via chuck configuration of your rotary device. The provided video will hopefully get you up and running while educating you on the inner workings of your rotary device!
Was This Video Helpful?
Take our survey and let us know your feedback.
Still Need Help?
If you need our assistance with your issue, please contact our customer support team at (1) 888-LST-SRVC (578-7782). If you're looking for support outside of our regular business hours, please leave a voice message or send an email at service@laserstar.net