![LaserStar Technologoes Logo-01.png]](https://26739.fs1.hubspotusercontent-na1.net/hub/26739/hubfs/LaserStar%20Technologoes%20Logo-01.png?height=40&name=LaserStar%20Technologoes%20Logo-01.png){kind=small}
Welding Solid State Lasers: Common Errors and Maintenance Tips, Operation Manuals
Troubleshooting information related to laser welding product issues, and Operations Manuals
All ND:YAG Laser Welders
Errors
- Safety Shutter Inv
- View Shutter Fault
- Simmer Supply OFF
- Laser or Safety Shutter Fault
- Cap or Volt Charge Fault
- Water Temp High
- Key(s) down. Halted
- IGBT Error or Laser not Firing
- High / Low Voltage 24 Volt
- Charge Supply High / Low Voltage
- Charger Supply Over Volt / Over Temp
- CAP Discharger Faulty
- Beam Expander Low / High Faulty
- Water Level Low
- Joystick(s) Stuck Halted
- Water Flow Low
Removing or Installing Laser Parts
- Installing an A/C Simmer Supply Retrofit Kit on the 2000 series
- Installing an A/C Simmer Supply Retrofit Kit on the 7000 and 1900 series
- Setting up and Adjusting the Microscope
- Argon Gas Regulator Set-up Guide
- Flushing the water system on a 99X series laser
- Liquid Mag Drive Replacement Procedure
- Removing the Flash Lamp Power Unit from iWeld Pedestal
- How to change the SD Card
- How to Mount - Dismount the Microscope Mounting Ring
- Replacing the Exhaust Filter iWeld Series
- Water Pump Exchange Tips and Tricks
- Replacing the Protective Disk
- Replacing the Simmer Board on an iWeld Benchtop
- Replacing the Simmer Board on an iWeld Pedestal
- Replacing the Safety Shutter on iWeld Series
- Replacing the Safety Shutter on an iWeld Pedestal
- Removing the Cap Charger on an iWeld Benchtop
- Removing an iWeld Laser Rail
- Removing the Flash Lamp Power Unit iWeld Benchtop
- Removing the Cap Charger on an iWeld Pedestal
- EVS5 Setup
Laser Issues
- The display is not turning ON
- Testing the 24VDC Power Supply in a iWeld System
- Testing the 24VDC Power Supply in a 2000 System
- A Rattle Noise Is Heard When the Laser Is Turned On and It Does Not Turn Off
- Chamber Lights are not Turning ON
- Finding True Laser Focus
- Argon Gas not Working
- I changed the water in my LaserStar Benchtop, and now I have an over voltage message
- Adjusting Fixed Argon Nozzle
- Adjusting Microscope Cross-Hairs
- Resetting Maintenance Alarms
- Resetting all the Maintenance Alerts in G3 Series
- Foot Pedal Not Working
Do It Yourself Laser Maintenance
- Replacing a Flash Lamp in 99X/97X systems
- How to Align an Nd:YAG Laser
- How to Check the Laser Alignment
- How to Change a Dead Battery in a Rabbit Core Control Board
- Replacing Air Filters in a Benchtop Machine
- Setting up and Adjusting the Scopes
- Mounting and Aligning the Scope Mounting Ring, Scope, Focus, and Crooshairs
- Installing Soft Touch Resonators
- How to Adjust the Trigger Transformer Plunger
- Changing the Flashlamp iWeld 4-Screw Chamber
- Cheking The Flashlamp Voltage on a LaserStar iWeld Series
- Test the Simmer Supply Board in the iWeld Series
- How to Test Fuses with a Digital Voltmeter
- Checking the Protective Disk iWeld Series
- Changing the DI Water and Filter on iWeld Benchtop Machines
- Changing the DI Water and Filter on the Pedestal Machine 7000, 1900 Series
- Changing the Flashlamp iWeld 6-Screw Chamber
- Changing the Flashlamp iWeld G4 and G5 Laser
- Replacing Gold Reflectors in an Nd:YAG Laser Welding System
- Replacing the Gold Reflectors in a 4-Screw Chamber