Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Resetting Maintenance Alarms

This article guides you step-by-step through the process of resetting the maintenance alarms on the laser

This procedure resets the maintenance alarm counters. The alarms will reappear when the days are fulfilled in each one 

  • Protective Disc every 7 days (use key - !)                                          
  • Clean weld chamber every 30 Days (use key - !)                    
  • Air filters every 90 Days (use keys ↑↓ Simultaneous)                                          
  • Change DI Water every 90 Days (use keys ↑↓ Simultaneous)                          
  • DI water filters every 180 Days (use keys ↑↓ Simultaneous)      

Group 343, Grouped object

 

Was This Article Helpful?

Please take our survey and share your feedback.

Do you still need help? 

If you need our assistance with your issue, please get in touch with our customer support team at (1) 888-LST-SRVC (578-7782). If you're looking for support outside of our regular business hours, please leave a voice message or send an email to service@laserstar.net