![LaserStar Technologoes Logo-01.png]](https://26739.fs1.hubspotusercontent-na1.net/hub/26739/hubfs/LaserStar%20Technologoes%20Logo-01.png?height=40&name=LaserStar%20Technologoes%20Logo-01.png){kind=small}
Welding Solid State Lasers: Common Errors and Maintenance Tips
Troubleshooting information related to laser welding product issues.
Errors
- View Shutter Fault
- IGBT Error or laser not firing
- Laser or Safety Shutter Fault
- High / Low Voltage 24 Volt
- Charger Supply Over Volt / Over Temp
- Volt Charge FLT
- Charge Supply HI / LOW Voltage
- Simmer Supply OFF
- CAP Discharger Faulty
- Beam Expander Low/High Faulty
- Water Level Low
- Joystick(s) Stuck Halted
- Water Flow Low
Removing or Installing Laser Parts
- Removing the Flahs Lamp Power Unit from iWeld Pedestal
- Installing an A/C Simmer Supply Retrofit Kit on the 2000 series
- Installing an A/C Simmer Supply Retrofit Kit on the 7000 and 1900 series
- Liquid Mag Drive Replacement Procedure
- How to change the SD Card
- How to Mount - Dismount the Microscope Mounting Ring
- Replacing the Exhaust Filter iWeld Series
- Water Pump Exchange Tips and Tricks
- Replacing the Protective Disk
- Replacing the Simmer Board on an iWeld Benchtop
- Replacing the Simmer Board on an iWeld Pedestal
- Replacing the Safety Shutter on iWeld Series
- Replacing the Safety Shutter on an iWeld Pedestal
- Removing the Cap Charger on an iWeld Benchtop
- Removing an iWeld Laser Rail
- Removing the Flash Lamp Power Unit iWeld Benchtop
- Removing the Cap Charger on an iWeld Pedestal
- EVS5 Setup
Laser Issues
DIY Laser Maintenance
- How to Check the Laser Alignment
- How to Change a Dead Battery in a Rabbit Core Control Board
- Installing Soft Touch Resonators
- Changing the Flashlamp iWeld 4-Screw Chamber
- Cheking The Flashlamp Voltage on a LaserStar iWeld Series
- Test the Simmer Supply Board in the iWelds Series
- How to Test Fuses with a Digital Voltmeter
- Checking the Protective Disk iWeld Series
- Changing the DI Water and Filter on iWeld Benchtop Machines
- Changing the DI Water and Filter on the Pedestal Machine 7000, 1900 Series
- Changing the Flashlamp iWeld 6-Screw Chamber
- Replacing Gold Reflectors in a NDYag Laser Welding System
- Replacing the Gold Reflectors in a 4-Screw Chamber